Blacklight LED wave ripple flicker special effects lighting kit 12 volt DC BLKIT

Description

This unit is a professional blacklight LED wave ripple flicker simulation light source for building props, scenery and costumes. When the control is set to the faster speeds a flicker for flame effects can be achieved. The kit is operated from 8 AA batteries, and runs for more than 12 hours on new alkaline batteries (not included). The cable socket assembly can be press fit into a 7/16” hole drilled into rigid foam, wood or other material. The taper of the socket body locks it into place, and the socket has a front flange to limit the insertion depth and provide a finished appearance.
This kit runs only on 12 volts DC either from the included 8 AA cell battery holder (batteries not included) or from a 12 volt DC power supply.
The WEC (Wave Effects Control) functions are as follows: The Light button is used to set the control to static dimming mode.
The Speed (On/Off) button provides 20 speeds. In the static dimming mode this button provides dimming in 12 steps, 10% - 95%. This button is also used to turn the unit off when it is held longer than 3 seconds. The control retains the last settings when turned off.
The Mode button provides six dynamic effects, and dimming: 1. Wave / Ripple (Shallow) 2. Wave / Ripple (Storm) 3. Wave / Ripple (Average) 4. Wave (Rough Surf) 5. Wave (Storm Swells) 6. Wave (Deep Swells) 7. Static dimming
This kit consists of a Wave Effects Control (WEC1) with 6 different wave and ripple modes, a blacklight bi-pin LED lamp with socket assembly (EEL1-SBL2-BL), and a 12-volt battery holder (BHC1-8AA-12V). The LED black light bulb operates from 12 volts DC at 125ma nominal current, 1.5 watts. The bulb is molded of clear silicone rubber and has a maximum current of 185ma at 12 volts (2.3 watts) when warmed up. The blacklight bulb uses 24 LEDs with ultraviolet UV-A 390nm to 395nm nominal wavelength peak.
Applications include:
Creating unique water and flame effects when used for illumination of fluorescent paints and fluorescent acrylic sheet plastics